Digi IX14

Virtual Private Networks (VPN) IPsec
IX14 User Guide
561
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > IPsec.
4. Create a new IPsec tunnel or select an existing one:
n
To create a new IPsec tunnel, see Configure an IPsec tunnel.
n
To edit an existing IPsec tunnel, click to expand the appropriate tunnel.
5. After creating or selecting the IPsec tunnel, click Active recovery.
6. Enable active recovery.