Virtual Private Networks (VPN) IPsec
IX14 User Guide
571
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > SCEP Client.
4. For Add clients, enter a name for the SCEP client and click .
The new SCEP client configuration is displayed.
5. Click Enable to enable the SCEP client.
6. For Renewable Time, type the number of days that the certificate enrollment can be renewed,
prior to the request expiring. This value is configured on the SCEP server, and is used by the
IX14 device to determine when to start attempting to auto-renew an existing certificate. The
default is 7.
7. (Optional) For CRL file name, type the filename of the Certificate Revocation List (CRL) from the
CA.
The CRL is stored on the IX14 device in the /etc/config/scep_client/client_name directory.
To Next Page
Loading...
Need help?
General
