Digi IX14 User Manual

Virtual Private Networks (VPN) IPsec
IX14 User Guide
574
(config network scep_client scep_client_name)> distinguished_name st
value
(config network scep_clientscep_client_name )>
d. Set the Locality:
(config network scep_client scep_client_name)> distinguished_name l
value
(config network scep_client scep_client_name)>
e. Set the Organization:
(config network scep_client scep_client_name)> distinguished_name o
value
(config network scep_client scep_client_name)>
f. Set the Organizational Unit:
(config network scep_client scep_client_name)> distinguished_name ou
value
(config network scep_client scep_client_name)>
g. Set the Common Name:
(config network scep_client scep_client_name)> distinguished_name cn
value
(config network scep_client scep_client_name)>
10. Set the number of days that the certificate enrollment can be renewed, prior to the request
expiring. This value is configured on the SCEP server, and is used by the IX14 device to
determine when to start attempting to auto-renew an existing certificate. The default is 7.
(config network scep_client scep_client_name)> renewable_time integer
(config network scep_client scep_client_name)>
11. (Optional) Set the filename of the Certificate Revocation List (CRL) from the CA.
The CRL is stored on the IX14 device in the /etc/config/scep_client/client_name directory.
(config network scep_client scep_client_name)> crl_name name
(config network scep_client scep_client_name)>
12. Save the configuration and apply the change:
(config network scep_client scep_client_name)> save
Configuration saved.
>
13. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Digi IX14 Specifications

General

Brand	Digi
Model	IX14
Category	Network Router
Language	English