Virtual Private Networks (VPN) IPsec
IX14 User Guide
576
g. The remaining fields can be left at their defaults or changed as appropriate.
h. Click OK.
IX14 configuration
On the IX14 device:
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > SCEP Client.
4. For Add clients, enter a name for the SCEP client and click .
The new SCEP client configuration is displayed.
5. Click Enable to enable the SCEP client.
To Next Page
Loading...
