Virtual Private Networks (VPN) OpenVPN
IX14 User Guide
584
l
The Private key (for example, server.key).
l
The Diffie Hellman key (usually in dh2048.pem).
n
Active recovery configuration. See Configure SureLink active recovery for OpenVPN for
information about OpenVPN active recovery.
Additional configuration items
n
The route metric for the OpenVPN server.
n
The range of IP addresses that the OpenVPN server will provide to clients.
n
The TCP/UDP port to use. By default, the IX14 device uses port 1194.
n
Access control list configuration to restrict access to the OpenVPN server through the firewall.
n
Additional OpenVPN parameters.
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > OpenVPN > Servers.
4. For Add, type a name for the OpenVPN server and click .
The new OpenVPN server configuration is displayed.
To Next Page
Loading...
Need help?
General
