Virtual Private Networks (VPN) L2TP
IX14 User Guide
642
c. (Optional) Set the UDP port to use to connect to the L2TP network server:
(config vpn l2tp lac lac_tunnel)> port int
(config vpn l2tp lac lac_tunnel)>
where int is an integer between 1 and 65535. The default is 1701.
d. (Optional) Set the username to use to log into the server:
(config vpn l2tp lac lac_tunnel)> username username
(config vpn l2tp lac lac_tunnel)>
e. (Optional) Set the password to use to log into the server:
(config vpn l2tp lac lac_tunnel)> password password
(config vpn l2tp lac lac_tunnel)>
f. (Optional) Set the metric for the tunnel:
(config vpn l2tp lac lac_tunnel)> metric int
(config vpn l2tp lac lac_tunnel)>
where int is an integer between 0 and 65535. The default is 1.
g. Set the firewall zone for the tunnel. This is used by packet filtering rules and access control
lists to restrict network traffic on the tunnel.
i. Use the ? to determine available zones:
(config vpn l2tp lac lac_tunnel)> zone ?
Zone: The firewall zone assigned to this tunnel. This can be used
by packet
filtering rules and access control lists to restrict network
traffic on this
tunnel.
Format:
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
Current value:
(config vpn l2tp lac lac_tunnel)>
ii. Set the zone:
(config vpn l2tp lac lac_tunnel)> zone zone
(config vpn l2tp lac lac_tunnel)>
h. (Optional): Custom PPP configuration:
To Next Page
Loading...
Need help?
General
