Digi IX14

Virtual Private Networks (VPN) L2TP
IX14 User Guide
646
Additional configuration items
n
The interval between connectivity tests.
n
Whether the interface should be considered to have failed if one of the test targets fails, or all
of the test targets fail.
n
The number of probe attempts before the PPP-over-L2TP connection is considered to have
failed.
n
The amount of time that the device should wait for a response to a probe attempt before
considering it to have failed.
To configure the IX14 device to regularly probe the PPP-over-L2TP connection:
WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > PPP-over-L2TP.
4. Create a new PPP-over-L2TP access concatenator or select an existing one:
n
To create a new L2TP access concatenator , see Configure a PPP-over-L2TP tunnel.
n
To edit an existing L2TP access concatenator , click to expand the appropriate tunnel.