Routing Dynamic DNS
IX14 User Guide
730
b. Set the service:
(config network ddns new_ddns_instance)> service service_name
(config network ddns new_ddns_instance)>
6. If custom is configured for service, set the custom URL that should be used to update the IP
address with the Dynamic DNS provider:
(config network ddns new_ddns_instance)> custom url
(config network ddns new_ddns_instance)>
7. Set the domain name that is linked to the interface's IP address:
(config network ddns new_ddns_instance)> domain domain_name
(config network ddns new_ddns_instance)>
8. Set the username to authenticate with the Dynamic DNSprovider:
(config network ddns new_ddns_instance)> username name
(config network ddns new_ddns_instance)>
9. Set the password to authenticate with the Dynamic DNSprovider:
(config network ddns new_ddns_instance)> password pwd
(config network ddns new_ddns_instance)>
10. (Optional) Set the amount of time to wait to check if the interface's IP address needs to be
updated:
(config network ddns new_ddns_instance)> check_interval value
(config network ddns new_ddns_instance)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number{w|d|h|m|s}.
For example, to set check_interval to ten minutes, enter either 10m or 600s:
(config network ddns new_ddns_instance)> check_interval 600s
(config network ddns new_ddns_instance)>
The default is 10m.
11. (Optional) Set the amount of time to wait to force an update of the interface's IP address:
(config network ddns new_ddns_instance)> force_interval value
(config network ddns new_ddns_instance)>
where value is any number of weeks, days, hours, minutes, or seconds, and takes the format
number{w|d|h|m|s}.
For example, to set force_interval to ten minutes, enter either 10m or 600s:
(config network ddns new_ddns_instance)> force_interval 600s
(config network ddns new_ddns_instance)>
The default is 3d.
To Next Page
Loading...
Need help?
General
