Digi IX14

Command line interface Configuration mode
IX14 User Guide
793
(config)> show auth user new-user group
0 admin
(config)>
Delete elements from a list
When used with parameters that contains lists of elements, the del command is used to delete an
element in the list.
For example, to delete an authentication method:
1. Use the show command to display current authentication method configuration:
(config)> show auth method
0 local
1 tacacs+
2 radius
(config)>
2. Delete one of the authentication methods by using the del index_number command. For
example:
a. To delete the local authentication method, use the index number 0:
(config)> del auth method 0
(config)>
b. Use the show command to verify that the local authentication method was removed:
(config)> show auth method
0 tacacs+
1 radius
(config)>
Move elements within a list
Use the move command to reorder elements in a list.
For example, to reorder the authentication methods:
1. Use the show command to display current authentication method configuration:
(config)> show auth method
0 local
1 tacacs+
2 radius
(config)>
2. To configure the device to use TACACS+ authentication first to authenticate a user, use the
move index_number_1 index_number_2 command:
(config)> move auth method 1 0
(config)>