Digi PortServer II User Manual

90030500B Troubleshooting Page 207
frames/octets buffered
The number of frames/octets held for later transmission because sending them would
have caused the Committed Information Rate to be exceeded.
frames/octets dropped
The number of frames/octets discarded because sending them would have caused the
Committed Information Rate to be exceeded.
An example of a Frame Relay statistics display is shown below:
#> info frame:1-3,5,8,9-10
Link Index 8
frCircuitReceivedFrames:19987 frCircuitSentFrames : 19813
frCircuitReceivedOctets:569596 frCircuitSentOctets : 523582
Received Fragments: 0 Sent Fragments : 0
Reassembled Frames : 0Sent Fragmented : 0
Reassemble Failures : 0
frCircuitReceivedBECNs: 0 frCircuitReceivedFECNs: 0
frErrType : 3 frErrTime : 921300
receive errors : 83 undefined error : 0
too long : 83 too short : 0
bad DLCI : 0 unknown DLCI : 0
undefined LMI error : 0 LMI unknown IE : 0
LMI bad sequence : 0 LMI unknown report : 0
frErrData : 4 1 3 cc 45 0 5 dc 5b 4f 20 0 ff 1 52 21
frErrFaults : 0
LMI statistics
status requests : 19726 full status requests : 3288
status responses : 19726 full status responses : 3288
rcvd sequence number : 177 sent sequence number : 177
updates or async status: 8
Note:
The info
framerelay
option displays counters and other information about
the frame relay circuits (links) or the PVCs (DLCIs) that are bound to any par-
ticular circuit.
The first
range
value in the example above specifies the circuits. A single
number, a range of numbers, and an “*” for all links may be entered. Even
though a mixed range was requested, only Circuit 8 is up in this PortServer II

Digi PortServer II Specifications

General

Brand	Digi
Model	PortServer II
Category	Server
Language	English