Page 208 Troubleshooting 90030500B
(the other links requested are not set up for Frame Relay operation).
By adding another index after the link index, it is possible to display the statis-
tics for one, some, or all
active
PVCs for one, some, or all links. For example:
#> info fra:*:*
Link Index 8, DLCI 16
frCircuitReceivedFrames: 253 frCircuitSentFrames : 87
frCircuitReceivedOctets: 260432 frCircuitSentOctets : 89610
Received Fragments : 0 Sent Fragments : 0
Reassembled Frames : 0 Sent Fragmented : 0
Reassemble Failures : 0
frCircuitReceivedBECNs : 0 frCircuitReceivedFECNs: 0
frErrType : 3 frErrTime : 921300
receive errors : 83 undefined error : 0
too long : 83 too short : 0
bad DLCI : 0 unknown DLCI : 0
undefined LMI error : 0 LMI unknown IE : 0
LMI bad sequence : 0 LMI unknown report : 0
frErrData : 4 1 3 cc 45 0 5 dc 5b 4f 20 0 ff 1 52 21
frErrFaults : 0
Congestion statistics
frames sent within CIR : 5780
octets : 5940896
frames sent beyond CIR : 0
octets : 0
frames buffered : 0
octets : 0
frames dropped : 0
octets : 0
Note:
Only DLCI 16 on Link 8 is active. The command
#> info frame:1-3,5,8,9-10:16
will produce the same output while the command
#> info frame:1-3,5,8,9-10:18
will produce no output.
To Next Page
Loading...
Need help?
General