Digi XBEE-PRO S3B Manual

XBee‐PRO®900HP/XBee‐PRO®XSCRFModules
©2014DigiInternationalInc. 140
Labeling Requirements
Labeling requirements for Industry Canada are similar to those of the FCC. A clearly
visible label on the outside of the final product enclosure must display one of the following
text:
Contains IC: 1846A-XB900HP
The integrator is responsible for its product to comply with IC ICES?003 & FCC Part 15,
Sub. B-Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry
Canada accepts FCC test report or CISPR 22 test report for compliance with ICES-003.
Antenna Options: 900 MHz Antenna Listings
The antennas in the tables below have been approved for use with this module. Digi does not carry all of these
antenna variants. Contact Digi Sales for available antennas.
Table A-01. Antennas approved for use with the XBee-PRO 900HP RF Module
Part Number
Type Connector Gain Application
Cable Loss or
Power Reduction
for S3B Radio
Omni-directional antennas
A09-F0
Fiberglass Base
RPN 0 dBi Fixed 0dB
A09-F1
Fiberglass Base
RPN 1.0 dBi Fixed 0dB
A09-F2
Fiberglass Base
RPN 2.1 dBi Fixed 0dB
A09-F3
Fiberglass Base
RPN 3.1 dBi Fixed 0dB
A09-F4
Fiberglass Base
RPN 4.1 dBi Fixed 0dB
A09-F5
Fiberglass Base
RPN 5.1 dBi Fixed 0dB
A09-F6
Fiberglass Base
RPN 6.1 dBi Fixed 0dB
A09-F7
Fiberglass Base
RPN 7.1 dBi Fixed 0dB
A09-F8
Fiberglass Base
RPN 8.1 dBi Fixed 0dB
A09-F9 Base Station RPSMAF 9.2dBi Fixed 0dB
A09-W7 Wire Base Station RPN 7.1 dBi Fixed 0dB
A09-F0
Fiberglass Base
RPSMA 0 dBi Fixed 0dB
A09-F1
Fiberglass Base
RPSMA 1.0 dBi Fixed 0dB
A09-F2
Fiberglass Base
RPSMA 2.1 dBi Fixed 0dB
A09-F3
Fiberglass Base
RPSMA 3.1 dBi Fixed 0dB
A09-F4
Fiberglass Base
RPSMA 4.1 dBi Fixed 0dB
A09-F5
Fiberglass Base
RPSMA 5.1 dBi Fixed 0dB
A09-F6
Fiberglass Base
RPSMA 6.1 dBi Fixed 0dB
A09-F7
Fiberglass Base
RPSMA 7.1 dBi Fixed 0dB
A09-F8
Fiberglass Base
RPSMA 8.1 dBi Fixed 0dB
A09-M7 Base Station RPSMAF 7.2dBi Fixed 0dB
A09-W7SM Wire Base Station RPSMA 7.1 dBi Fixed 0dB
A09-F0TM
Fiberglass Base
RPTNC 0 dBi Fixed 0dB
A09-F1TM
Fiberglass Base
RPTNC 1.0 dBi Fixed 0dB
A09-F2TM
Fiberglass Base
RPTNC 2.1 dBi Fixed 0dB
A09-F3TM
Fiberglass Base
RPTNC 3.1 dBi Fixed 0dB
A09-F4TM
Fiberglass Base
RPTNC 4.1 dBi Fixed 0dB
A09-F5TM
Fiberglass Base
RPTNC 5.1 dBi Fixed 0dB
A09-F6TM
Fiberglass Base
RPTNC 6.1 dBi Fixed 0dB

Digi XBEE-PRO S3B Specifications

General

Brand	Digi
Model	XBEE-PRO S3B
Category	Control Unit
Language	English