XBeeāPROĀ®ī ±900HP/XBeeāPROĀ®ī ±XSCī ±RFī ±Modulesī ±
Ā©ī ±2014ī ±Digiī ±Internationalī ±Inc. ī ±ī ±ī ±ī ±ī ±7
1.ī ±XBeeāPROī ±900HPī ±RFī ±Moduleī ±Hardware
This manual describes the operation of the XBee-PRO
Ā®
900HP RF module, which consists of firmware loaded onto XBee-
PRO S3B hardware.
XBee-PRO 900HP embedded RF modules provide wireless connectivity to end-point devices in mesh networks. Utilizing
the XBee-PRO Feature Set, these modules are interoperable with other devices. With the XBee, users can have their net-
work up-and-running in a matter of minutes without configuration or additional development.
XBee-PRO S3B Hardware Description
The XBee-PRO S3B radio module hardware consists of an Energy Micro EFM32G230F128 microcontroller, an
Analog Devices ADF7023 radio transceiver, an RF power amplifier, and in the programmable version, a
Freescale MC9S08QE32 microcontroller.
Worldwide Acceptance
FCC Certified (USA) - Refer to Appendix B for FCC Requirements.
Systems that include XBee-PRO Modules inherit Digiās FCC Certification
ISM (Industrial, Scientific & Medical) frequency band
Manufactured under ISO 9001:2000 registered standards
XBee-PRO
Ā®
(900 MHz) RF Modules are approved for use in U.S. and Canada.
RoHS compliant
To Next Page
Loading...
