Digi XBEE-PRO S3B Manual

XBee‐PRO
®
900HP/XBee‐PRO
®
XSCRFModules
©2014DigiInternationalInc. 6
Preface:HowtoUsethisManual
This combined manual contains documentation for two hardware platforms: the S3 and S3B. Existing S3
customers are strongly encouraged to migrate their systems and designs to the newer and superior S3B
platform.
This manual also contains documentation for two RF protocols: XStream Compatible (XSC) and 900HP. The
XSC firmware is provided for customers who need compatibility with existing networks that need to be
9XStream compatible. Customers who do not require this compatibility should not use the XSC firmware, but
rather the newer 900HP firmware.
Documentation for the XSC firmware is contained in Appendix A. All other firmware documentation in the
manual is not applicable to XSC firmware. Likewise documentation in Appendix A is not applicable to the
900HP firmware.
The following table describes how to use this manual based on the Digi part number for the module:
Digi Part
Numbers
FCC ID
Hardware
Platform
Pre-installed
Firmware
Firmware
Available
Regulatory
Information
XBP09-XC… MCQ-XBEEXSC S3 XSC XSC Appendix C
XBP9B-XC*T-001
(revision G and
earlier)
XBP9B-XC*T-002
(revision G and
earlier)
XBP9B-XC*T-021
(revision F and
earlier)
XBP9B-XC*T-022
(revision F and
earlier)
MCQ-XBPS3B S3B XSC XSC Appendix C
XBP9B-XC*T-001
(revision H and later)
XBP9B-XC*T-002
(revision H and later)
XBP9B-XC*T-021
(revision G and later)
XBP9B-XC*T-022
(revision G and later)
all other part numbers
beginning XBP9B-
XC...
MCQ-XB900HP S3B XSC XSC / 900HP Appendix B
XBP9B-D… MCQ-XB900HP S3B 900HP XSC / 900HP Appendix B

Digi XBEE-PRO S3B Specifications

General

Brand	Digi
Model	XBEE-PRO S3B
Category	Control Unit
Language	English