EasyManua.ls Logo

Digi XBEE-PRO S3B - Xbee-PRO XSC Key Features; Worldwide Acceptance; Xbee-PRO XSC Specifications

Digi XBEE-PRO S3B
151 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
XBee‐PRO®900HP/XBee‐PRO®XSCī ±RFī ±Modules
©2014DigiInternationalInc. 94
XBee-PRO XSC Key Features
Worldwide Acceptance
FCC Certified (USA) - Refer to Appendices B and C for FCC Requirements.
Systems that include XBee-PRO Modules inherit Digi’s FCC Certification
ISM (Industrial, Scientific & Medical) frequency band
Manufactured under ISO 9001:2000 registered standards
XBee-PROā„¢ XSC (900 MHz) RF Modules are approved for use in US and Canada.
RoHS compliant
Xbee-PRO XSC Specifications
Tableī ±A‐01. XBee‐PROī ±XSCī ±RFī ±Moduleī ±Specifications
Specification XBee-PRO XSC (S3 Hardware) XBee-PRO XSC (S3B Hardware)
Performance
Indoor/Urban Range Up to 1200ft (370m) up to 2000ft (610m)
Outdoor line-of-sight Range
Up to 6 miles (9.6km) w/ dipole antenna
Up to 15 miles (24km) w/ high-gain antenna
Up to 9 miles (14km) w/ dipole antenna
Up to 28 miles (45km) w/ high-gain antenna
Interface Data Rate
125 - 65,000 bps
(Software selectable, includes non-standard baud rates)
Throughput Data Rate 9,600 bps 9.6kbps or 19.2kbps
RF Data Rate 10kbps 10kbps or 20kbps
Transmit Power Output +20dBm (100mW) Up to 24dBm (250mW) software selectable
Long Range Data Integrity
XBee-PRO XSC-S3:
• Indoor/Urban: 1200' (370m)
• Outdoor line-of-sight: Up to 6 miles (9.6
km)
• Outdoor line-of-sight: Up to 15 miles (24
km) w/ high gain antenna
• Receiver Sensitivity: -106 dBm,
XBee-PRO XSC-S3B:
• Indoor/Urban range: 2000’ (610 m)
• Outdoor line-of-sight range: 9 miles (14 km)
• Receiver Sensitivity: -109 dBm
Advanced Networking & Security
• True peer-to-peer (no ā€œmasterā€ required)
communications
• Point-to-point & point-to-multipoint topolo-
gies supported
• Retries and Acknowledgements
• 7 hopping channels, each with over 65,000
available network addresses
• FHSS (Frequency Hopping Spread Spec-
trum)
Easy-to-Use
• No configuration required for out-of-the-box 
RF data communications
• Advanced configurations available through 
standard AT & binary commands
• Portable (small form factor easily designed 
into a wide range of data radio systems)
• Software-selectable serial interface baud rates
• I/O Support: CTS, RTS (& more)
• Support for multiple data formats 
(parity, start and stop bits, etc.)
• Power-saving Sleep Modes

Table of Contents

Other manuals for Digi XBEE-PRO S3B

Related product manuals