Digi XBEE-PRO S3B Manual

XBee‐PRO®900HP/XBee‐PRO®XSCRFModules
©2014DigiInternationalInc. 146
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement
Labeling Requirements
Labeling requirements for Industry Canada are similar to those of the FCC. A clearly
visible label on the outside of the final product enclosure must display one of the following
text:
Contains IC: 1846A-XBEEXSC
OR
Contains IC: 1846A-XBPS3B
The integrator is responsible for its product to comply with IC ICES?003 & FCC Part 15,
Sub. B-Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry
Canada accepts FCC test report or CISPR 22 test report for compliance with ICES-003.
Antenna Options: 900 MHz Antenna Listings
Table A-01. Antennas approved for use with the XBee-PRO XSC RF Module
Part Number
Type Connector Gain Application
Cable Loss or
Power Reduction
for S3B Radio
Omni-directional antennas
A09-F0
Fiberglass Base
RPN 0 dBi Fixed 0dB
A09-F1
Fiberglass Base
RPN 1.0 dBi Fixed 0dB
A09-F2
Fiberglass Base
RPN 2.1 dBi Fixed 0dB
A09-F3
Fiberglass Base
RPN 3.1 dBi Fixed 0dB
A09-F4
Fiberglass Base
RPN 4.1 dBi Fixed 0dB
A09-F5
Fiberglass Base
RPN 5.1 dBi Fixed 0dB
A09-F6
Fiberglass Base
RPN 6.1 dBi Fixed 0dB
A09-F7
Fiberglass Base
RPN 7.1 dBi Fixed 0dB
A09-F8
Fiberglass Base
RPN 8.1 dBi Fixed 0dB
A09-F9 Base Station RPSMAF 9.2dBi Fixed 0dB
A09-W7 Wire Base Station RPN 7.1 dBi Fixed 0dB
A09-F0
Fiberglass Base
RPSMA 0 dBi Fixed 0dB
A09-F1
Fiberglass Base
RPSMA 1.0 dBi Fixed 0dB
A09-F2
Fiberglass Base
RPSMA 2.1 dBi Fixed 0dB
A09-F3
Fiberglass Base
RPSMA 3.1 dBi Fixed 0dB
A09-F4
Fiberglass Base
RPSMA 4.1 dBi Fixed 0dB
A09-F5
Fiberglass Base
RPSMA 5.1 dBi Fixed 0dB
A09-F6
Fiberglass Base
RPSMA 6.1 dBi Fixed 0dB
A09-F7
Fiberglass Base
RPSMA 7.1 dBi Fixed 0dB
A09-F8
Fiberglass Base
RPSMA 8.1 dBi Fixed 0dB
A09-M7 Base Station RPSMAF 7.2dBi Fixed 0dB
A09-W7SM Wire Base Station RPSMA 7.1 dBi Fixed 0dB
A09-F0TM
Fiberglass Base
RPTNC 0 dBi Fixed 0dB
A09-F1TM
Fiberglass Base
RPTNC 1.0 dBi Fixed 0dB
A09-F2TM
Fiberglass Base
RPTNC 2.1 dBi Fixed 0dB

Digi XBEE-PRO S3B Specifications

General

Brand	Digi
Model	XBEE-PRO S3B
Category	Control Unit
Language	English