Digifly AIR-BT - Page 3 Comp Start (Thermal) and Page 4 Comp Start (Glide)

AIR_Manual_506a_ENG_rev_1.pdf Page 14/96
3.3.2
PAGE 3 COMP START (THERMAL) AND PAGE 4 COMP START (GLIDE)
 Pages 3 and 4 provide information regarding the navigation towards the START Waypoint of your route:
o Current waypoint’s name
o Flight direction towards the optimized point of the current waypoint’s cylinder (
FOLLOW ME
)
o Required glide ration to reach the optimized point on the current waypoint’s cylinder
o Required speed to reach to the Start line (cylinder) exactly a the Start Gate’s opening time (
SS
)
o Shortest distance to the nearest point on the current waypoint’s cylinder (
D0
)
o Distance to the optimized point on the current waypoint’s cylinder (
D1
)
o Current time (
RT
)
o Time remaining (countdown) to the Start Gate opening time (
CS
)
o Approximate time of arrival to the cylinder line of the Start waypoint l (
ES
)
 When the Digifly recognizes a thermal and you make a turn to fly into it, the Digifly will automatically switch to
PG03
(THERMAL)
, which besides the navigation information, will also display the
Thermal Assist
instrument for
thermal core centering.
 When you fly “on a straight line for a period of time greater than the value set on the
VARIOMETER SETUP\ n. 16
CRUT parameter
(default 15sec), the instrument will automatically switch to PG04
COMP START (GLIDE)
PAGE 3 COMP START THERMAL PAGE 4 COMP START GLIDE