Digifly AIR-BT - Visual and Acoustic Distance Warning to the Ctr; 6.18 3 Dairspace Manager(Ctr)

AIR_Manual_506a_ENG_rev_1.pdf Page 46/96
6.18.2
VISUAL AND ACOUSTIC DISTANCE WARNING TO THE CTR
 Set the horizontal distance to the airspace, at which your warnings will go off, using the
MAIN SETUP\ n. 23
CTRD
parameter: 0=disabled, from 1 to 9999 mt=enabled (default 400)
 Set the horizontal distance to the airspace, at which your warnings will go off, using the
MAIN SETUP\ n. 24
CTRH parameter
: 0=disabled, from 1 to 999 mt=enabled (default 400)
 When you fly inside the airspace or CTR, no matter what page you may be on, you will hear an alarm and a
popup message with warning details will be displayed during 6 seconds.
 To see the last pop-up warning message,
LONG press
the button while on page 12 (in both STD – standard
and USR – user settings); the message will be displayed during 6 seconds.
 The popup warning message and alarm will not be displayed again while you stay inside the airspace. If you fly
out and then fly into it again or if you go into the MENU and back out, it will reactivate; in will
not
be reactivated
if you simply switch pages.
6.18.3
CTR’s HORIZONTAL DISTANCE INDICATOR
 The horizontal distance to the CTR is displayed as a numeric value, in real time, on the “
DST
CTR
” instrument.
6.18.4
CTR’s VERTICAL DISTANCE INDICATOR
 The vertical distance to the CTR is displayed as a numeric value, in real time, on the “
ALT CTR
”.