Digifly AIR-BT - Navigate to a Single Waypoint (Goto)

AIR_Manual_506a_ENG_rev_1.pdf Page 48/96
8
NAVIGATE TO A SINGLE WAYPOINT (GOTO)
8.1
ACTIVATING NAVIGATION TO A WAYPOINT (GOTO)
8.1.1
NAVIGATION TO WAYPOINT HOME (GOTO HOME)
 Available only when you are on the
GPS INFO
page; it ensures that the instrument guides us back to the point
where we activated this function from.
It is particularly useful, for example, when we go flying in a new site where we don’t have any waypoints and we
want to be guided to the official landing zone.
In this case, first go to the landing zone and activate this function from there:
From the
GPS INFO
page, with valid GPS position,
LONG PRESS
the key; the message " Activate Home
Wpt ?" is shown, press the key to confirm or press the key to cancel. It creates a landing waypoint in the
User Waypoint list (“WPT USER”) with the current position data “HOM”, with the "A" (Airfield) on the “Sym” field
while it activates the navigation (GOTO) to it.
Note
: if the navigation function has been previously activated, first deactivate it. From the
GPS INFO
page
LONG
PRESS
the key; the message " Clear Nav ?" is shown, press the key to confirm or to cancel.
8.1.2
NAVIGATION TO THE NEAREST LANDING ZONE (GOTO LANDING)
 With a valid GPS position, go to the menu with the key, select the sub-menu “Wpt Near Airfield”.
 A list of the recorded landing fields (“Sym” field “
A
”) from both WP databases (USER+COMP) is displayed.
 This list is sorted by “nearest to you,” using the distance from the current GPS position.
 The cursor is automatically set on the nearest one. To choose a different one, scroll down the list (use the arrow
keys and ), select the one you’d like to go to,
LONG PRESS
the key, then confirm the choice to
activate the navigation to this WP by pressing the key again, or cancel the procedure using the key.
8.1.3
NAVIGATION TO THE NEAREST WAYPOINT (GOTO NEAREST)
 With a valid GPS position, go to the menu with the key, select the sub-menu “Wpt Nearest”.
 A list of all the nearest waypoints, obtained from both USER & COMP databases, will be displayed.
 The cursor is automatically set on the nearest Waypoint. If you’d like to go to a different one, scroll the list using
the arrow keys and , select the new waypoint,
LONG PRESS
the key then confirm the choice to
activate navigation to the WP by pressing the key again, or cancel the procedure using the key.