Digifly AIR-BT - Cross Country (XC)

AIR_Manual_506a_ENG_rev_1.pdf Page 16/96
3.4
CROSS COUNTRY (XC) PAGES
 Pages 7 and 8 provide information regarding navigation during Cross Country (XC) flying and provides
information regarding navigation towards the active waypoint:
o Active waypoint’s name
o Flight direction to reach the active waypoint
o Required glide to reach the active waypoint’s cylinder
o Distance to the active waypoint (
D1
)
o Estimated height at arrival to the active waypoint’s cylinder (
H1
)
 When the Digifly recognizes a thermal and you make a turn to fly into it, the Digifly will automatically switch to
PG07
XC (THERMAL),
which besides the navigation information, will also display the instruments for thermal
flying:
Thermal Assist
will help you center the thermal’s core better and (DT) will show you the distance to the
thermal’s core.
 When you fly “on a straight line for a period of time greater than the value set on the
VARIOMETER SETUP\ n. 16
CRUT parameter
(default 15sec) the instrument will automatically switch to PAGE0
8 XC (GLIDE)
PAGE 7 XC (THERMCAL) PAGE 8 XC (GLIDE)