Dini Argeo DFW - Page 15

FRONT PANEL KEYS AND INDICATORS
15
DFW LED DISPLAY VERSION
SCALE KEY
FUNCTION
ZERO
- Zeros the displayed gross weight, if it is within +/- 2% of the total capacity.
- Cancels the negative tare value.
- When entering numbers it decreases the digit to be modified.
TARE
- If pressed for an instant it carries out the semiautomatic tare.
- If pressed at length it allows entering the manual tare from keyboard.
- Cancels the negative tare value.
- In the numeric input phase it increases the digit to be modified.
MODE / 
- Performs a specific function of the operating mode set in the setup environment. See
paragraphs “MODE KEY FUNCTION / ” and “SELECTABLE OPERATING MODES”.
- In the numeric input phase it selects the digit to be modified, from left to right.
- In totalizator modes, if pressed twice consecutively, it allows to enter in a specific
menu to set the parameters of the totalizations.
1
2
3
4
5
6
7
8