USE THE INDICATOR AS WEIGHT REPEATER
48
Morover, it is possible to realize a network with a MASTER, which performs remotely functions of the
connected scales, and one or more REPEATERS, having the only function to repeat the weight.
9.2.1 OPERATION
When turned on, the MASTER predisposes himself to the connection with the present SLAVES (the message
“” appear, where n is the SLAVE number that you are trying to detect):
- If it has detect more than one SLAVE, displays the message “” e , so the sum of all detected SLAVES;
- If it has detected only one SLAVE, it stands on that scale.
- If all the instruments are switched off or if the radio signal does not reach the MASTER, on the display of
the same the message “” appears where n is the address of the SLAVE with which it try to
communicate.
If it has configured only one slave all the keys pressed on the MASTER are repeated on the SLAVE.
If more slave are configured and it is not in the SUM viewing, all the keys pressed on the MASTER are
repeated on the SLAVE with the exception of the MODE key and NUMERIC KEYS.
9.2.2 KEYS MAP REPEATED FROM MASTER IN VIEW OF A SLAVE
To Next Page
Loading...
