BASIC FUNCTIONS
29
While setting up the remote control ( ) is also possible select whether:
a) Use multiple remotes with a single indicator, without associating to it, therefore without limit the
number of remote controls used.
b) Use different indicators in the same area, matching each remote control to the desired indicator, in
order to execute the function only on it and thus avoid that the function is repeated on all indicators
in use.
Enabling this feature i twill be possible to combine up to 3 different remote controls (eg. for 3
different operators) for each indicator.
It's possible to link a new remote control with TARE key and ZERO key pressed at length (3 seconds).
When the instrument displays "" by pressing ENTER key of the keyboard the new remote
control is linked.
With C key of the keyboard, if the serial number exists, the remote control is removed.
6.8 DATE/TIME ADJUSTMENT (OPTIONAL OR INCLUDED DEPENDING ON THE
MODEL)
The indicator can be fitted with the date / time, which is useful when printing and for the SCREEN SAVER
function (see next paragraph), at the turn on the message “” is shown.
With the 17-key indicator, it is possible to program the date and time during the weighing, pressing in
sequence the F-keys and 8.
It will be asked to enter, in order, the
- DAY (“”)
- MONTH (“”)
- YEAR (“”)
- HOURS (“”)
- MINUTES (“”)
The introduction of each parameter is performed using the numeric keypad and must be confirmed with
ENTER/PRINT.
With the 5-key indicator, setting the date / time is possible only in the SETUP environment ( ).
6.9 “SCREEN SAVER” FUNCTION (OPTIONAL OR INCLUDED DEPENDING ON THE
MODEL)
If the indicator has the date / time, it is possible to enable the “Screen Saver” function in SETUP ( ):
after a programmable time (from 1 to 255 minutes) with the scale unloaded, the time is shown on the
display, in the “HH:MM:SS” format and the clock symbol ( ) . is enabled. As soon as a weight variation is
To Next Page
Loading...
