Page 43
AIM 2 Operation Manual
3. Select the desired automatic timer setting to
adjust (Backlight Timer, Standby Timer, or
Shutdown Timer). Then press SELECT to go
to the entry screen.
4. Use the numeric keypad to enter a timer
setting.
• To delete a character, press the Back
button. You also can use the left/right
arrow buttons to navigate within your
entry, or press CLEAR to delete the
entry and start over. Press CANCEL to
exit without saving changes.
• Press HOURS, MINUTES, or SECONDS
to switch between time units. The
maximum value is 4 hours.
5. When nished, press the NEXT softkey to
return to the SETTINGS screen.
To Next Page
Loading...