Dnepr MT10-36 - Page 89

Continued
List of com(Ju!sory maintenance jobs
Check adjustment of clutch release me-
chanism
Check
adjustment of wheel bearings
and
change around wheels
Check
steering column bearing adjust -
ment
Remove nuts which fasten the exhaust
tubes
to cylinder heads and lubricate
the thread
Change oil in engine
Check oil level in gear box and fill
up if necessary
Check oil level in main drive casing.
If necessary, add oil.
Check
tightening of body vibration ar -
rester
Tools :;nd
accessories
to be used
Screwdri-
ver,
fe~ler
gauge
Driver's
tools
Materials used
in maintenance
Graphite lubricant
BBH -1
GOST 5656-60
Filler funnel Oil AC-8
Feeler gau-
ge, funnel
Feeler gau-
ge, funnel
Dr
iver's
tools
GOST 10541-63; the
following
grades of
oils
are re commended
for use: in
summer-
M-12f (No. 8) in win-
ter-M8f (No. 9) or
all-weather oil M-IOf
TY38-l-267 -69. Change
oil after every 5000 km
run
Refer
to Technical
Servicing
(TS) No. 2
Refer to
TS No. 2
Technical
Servicing No. 2
Carry out all the jobs of Technical
Servicing No. l
Remove carbon from
spark plugs and
check the size of clearance between
electrodes (clearance should be
0.5 to
0.6 mm)
Change oil in
gear box casing
Lubricate the rear wheel brake drive
hinges
Lubricate
the rear brake cam axle
Change oil in main drive
Feeler
gauge
Fi
llcr fun-
nel, dipstick
Grease gun
Grease gun
Fi it
er fun-
nel, di]Jslick
• Never mix lubricant Lithol·24 with other oils,
Oil AC-8
GOST 10541 -63.
Use may be made of
oil TAJJ.-17 with perio-
dicity of
change after
10000 km run
Lubricant Lithol-24*
GOST 21150-75
Lithol-24
GOST 2 11 50-75
Oil for hypoid gears
GOST 4003-53. Use
may be made of oil
TA}J.- 17 with periodi-
city of
change after
10000 km run
10
7
8
87