dolycon CT100 Series - Page 70

CT100 inverter Function parameters
66
Function
code
Name
Detailed instruction of
parameters
Min. unit
Default
value
Modify
No.
F05.07
Linear speed
display
correction
0.1～999.9%
0.1%
1.0%
○
F05.08
Displayed
parameters 1
when running
BIT0: running frequency (Hz
on)
BIT1: set frequency (Hz
flickers)
BIT2: bus voltage (V on)
BIT3: output current (A on)
BIT4: output voltage (V on)
BIT5: rotating speed (rpm on)
BIT6: linear speed
BIT7: output power (% on)
BIT8: output torque (% on)
BIT9: input terminal status
BIT10: output terminal status
BIT11: PID reference (% on)
BIT12: PID feedback (% on)
BIT13: Pulse HDI frequency
BIT14: Count value
BIT15: PLC and current
stage of multi-step speed
0X01
07FF
○