dolycon CT100 Series - Page 71

CT100 inverter Function parameters
67
Function
code
Name
Detailed instruction of
parameters
Min. unit
Default
value
Modify
No.
F05.09
Displayed
parameters 2
when running
BIT0: torque setting (% on)
BIT1: keypad potentiometer
AI0 (V on)
BIT2: analog input AI1(V on)
BIT3: analog input AI2(V on)
BIT4: motor overload
percentage (% on)
BIT5: inverter overload
percentage (% on)
BIT6～15: reserved
0X01
0
○
F05.10
Displayed
parameters 1 at
stop
BIT0: set frequency (Hz
flickers)
BIT1: bus voltage (V on)
BIT2: input terminal status
BIT3: output terminal status
BIT4: potentiometer (V on)
BIT5: AI1 (V on)
BIT6: AI2 (V on)
BIT7: Pulse HDI frequency
(Hz on)
BIT8: PID reference (% on)
BIT9: PID feedback (% on)
BIT10: PLC and current
stage of multi-step speed
BIT11: torque setting (% on)
BIT12～BIT15: reserved
0X01
00FF
○
F05.11
Inverter rated
power
0.4～3000.0kW
0.1KW
Depend
on model
●
F05.12
Inverter rated
current
0.0～6000.0A
0.1A
Depend
on model
●