TECHNICAL DATA
3-4 EPT023558 Issue 1 February 2016
Blow applicators M230i-B100
Dimensions See drawings
Total weight 28kg
Applicator weight 3kg
Printer weight 17.7kg
Mounting kit 1 kg
Power supply
Mains input
90-250VAC
Power consumption
(230 VAC/50 Hz)
Maximum operating current/power:
Average operating current/power:
Standby current/power:
1.3A/299W
0.76A/175W
0.26A/60W
Power consumption
(115 VAC/60 Hz)
Maximum operating current/power:
Average operating current/power:
Standby current/power:
3.0A/345W
1.6A/184W
0.4A/46W
Recommended air pressure: 6 bar
Typical air consumption
Maximum air flow (peak):
Label in standby:
Application (one cycle):
Blow:
Assist blow and blow:
277 litres/min
0 litres/min
1.8liters
238 litres/min
277 litres/min
Noise level
Highest peak level recorded:
90.3 dB(A)
Print head width 108mm
Resolution 12 dots/mm
Web width max width of backing paper 114mm
Label roll - Max diameter
See also Part 6: Label & Ribbon Selection.
340mm
To Next Page
Loading...
