TECHNICAL DATA
EPT023558 Issue 1 February 2016 3-5
Label roll - Inner diameter
See also Part 6: Label & Ribbon Selection.
75.5 - 77.3mm
Label roll - Max length 600m
Label - Max width - (incl. Backing paper) 114mm
Label - Max width 111mm
Label length 40 - 600mm
Ribbon - Max length 600m
Ribbon - Max roll diameter 90mm
Ribbon - Recommended Inner roll diameter 25 - 26.2mm
Applicator type Blow; Top or Side
Pad size (order specific)
(width x length)
100 x 100mm
Label - Max size
(width x length)
100 x 100mm
Distance to product 50 mm
Max printer speed 300mm/s
Recommended printer speed 200mm/s
Recommended highest cycle speed. 0.97 seconds
62 labels/min
Max recommended linear speed of conveyor 60m/min
PCU dimensions
Including cable glands and mounting plate.
405 x 280 x
130mm
PCU weight 7kg
Main fuse
(PCU) Located in the mains inlet and is the
same for all voltages.
6.3A
Blow applicators M230i-B100
To Next Page
Loading...
