D439E Service Manual 2. Engine Mechanical System (D439E)
125
Installation
1. Install thermostat housing (1) to the cylinder head.
2. Install the water pump (1) and water pump pulley
(2) to the timing gear case.
Tightening torque : 16.7~25.5 Nm (1.7~2.6 kgf.m,
12.4~18.9 lb-ft)
3. Install the \/-belt (1) and adjust the tension using
the alternator mounting nuts and adjusting bolts(2).
V-belt tension : 12~16mm deflection
(with a force of 10kg)
To Next Page
Loading...
