Doosan D55C-5 - Check before Use

To Next Page

To Previous Page

D439E Service Manual 5. Service Tool

203

5. Service Tool

Check before use

Read me first

Introduction

Thank you for purchasing G-scan. This manual describes the basic information for using G-scan. Before

operation, please read this manual to be familiar with important information.

may be reproduced in any form without prior written permission of Global Information Technology Co., Ltd.

No patent liability is assumed with respect to the use of the information contained herein.

G-scan is registered trademark or trademark of Global Information Technology Corporation.

Disclaimer

G-scan specifications and manual are subject to change without prior notice. Global Information technology

Co., Ltd. assumes no liability for the products, which GIT do not produce.

Overview

Comparing with the conventional diagnostic tool, the interface of G-scan is designed for easy operation so that

efficiency of service maintenance is maximized.

• Input using the Touch Screen

Without complicated button operation, you can select menu and function on the screen directly for easy

operation.

• 5.6″ Color TFT LCD

Adapting the 5.6″ large size Color TFT LCD, more data can be shown on the screen at the same time.

• USB communication interface

Using the USB communication interface, it can be connected with other options to be developed in the future.

• Possible to search the DTC of all control module installed in vehicle at one time

• Diagnose the vehicle with CARB OBD-II

• Record the current data

• Support Vehicle S/W management functions for diagnosis

• Actuator test

• Comparison analysis through dual mode

• Support general description relating to DTC

Other manuals for Doosan D55C-5