D439E Service Manual 5. Service Tool
237
Exit from “Setup”
1. After completing “Setup”, move to other Tab.
• Select
to move to “User Info”.
• Using stylus pen, select the “Tab” on the upper portion of the touch screen directly to move.
2. Move to the main screen
• Select
to move to the main screen.
• Select
at the top right of the screen to move to the main screen.
3. Selecting ‘Move to main screen’, following message will be shown.
<Figure 9: Save Message>
Save the setups and exit to the main screen.
Cancel the setups and exit to the main screen.
To Next Page
Loading...
