D439E Service Manual 5. Service Tool
256
System Selection using touch screen
• The vehicle selection process and its caution for using the touch screen are the same for using the H/W
button described.
• When the wanted items are not shown in each zone, move the scroll bar up and down to find the items.
• To delete the registered system in the “Selected” zone, select the system in the “Selected” zone again and
then select
or button.
NOTE
The information of latest vehicle selection is always memorized although power is off. Select
button and then previous selection will be available.
DTC search for multi systems is supported only in
function. Otherwise only selected
one system will be searched.(in DTC Analysis)
Multiple System Selection
Through
more than one system can be diagnosed. Select all control modules which
may have problems in the vehicle. However, multiple systems selection is not supported for the vehicle with
some specific communication protocol type.
To Next Page
Loading...
Need help?
General
