D439E Service Manual 5. Service Tool
261
NOTE
• When fault code is many and all are not shown in one screen, move the scroll bar at right side using the
stylus pen or
buttons to find.
• If you want to move back to main screen, press the
button or on top right side.
Diagnosis Sequence for DTC and References
Check Tips
1. Select the DTC for detailed description.
2. Select
or button, and you will see description window.
<Figure 2: Tips>
3. If you want to close the ‘General Description’, select
, button again or
button.
To Next Page
Loading...
