Doosan D55C-5 - Page 285

D439E Service Manual 5. Service Tool
283
Example of Vehicle S/W Management Function
Resetting Adaptive Values
The "Resetting Adaptive Values" function is used to reset adaptive learn data on specific ECUs.
z On the main screen, select , then screen will show the window as in
<Figure 2>. After checking the conditions shown in screen, select or button.
<Figure 2: Resetting Adaptive Values - STEP 1>
z After checking the conditions shown in the message window, select to initialize the
adaptive value.
<Figure 3: Resetting Adaptive Values - STEP 2>