D439E Service Manual 5. Service Tool
357
<Figure 2: Message for confirming the O/S update condition >
It is the message when the condition for updating the O/S is not satisfied.
Please check the data upgrade condition of SD card and the connection of the AC/DC power adapter.
• When the O/S version of main module is the same with that of the update file saved in SD card
<Figure 3: When current version is the latest version>
When this message pop-up is shown, press any key to turn OFF the G-scan automatically. As the current
version is the latest one, use the equipment after booting normally.
To Next Page
Loading...
