Dormakaba ED900 - Operator; Options - Customer 115 Vac Connection to Terminal Blocks

44
ED900 02-202008125330
dormakaba ED900 Installation Instructions – Double egress door Chapter 14
. Options – Customer  Vac connection to terminal blocks
TIGHTEN MAINS TERMINAL TO - in-lb
Use Copper Conductors ONLY
WARNING
Work on electrical equipment and
 Vac wiring installation must
be performed only by qualified
personnel!
.. Conduit box.
. Conduit box (Fig. ..).
• U/L approved conduit box accessory;
provides  Vac surface wiring to
ED.
• Reference Para. .. for conduit box
installation.
.. Power cord wiring kit.
. Power cord wiring kit (Fig. ..).
• Eliminates need for hard wiring. Permits
ED to plug directly into  Vac
receptacle.
• Power cord length: " from end of
conduit box to center of plug.
CAUTION
Insure power cord installation
conforms to local and national
electrical codes.
1 115 VAC terminal
block
2 Ground terminal
3 Mains terminal
torque and wire label
5 M3.5 screw
6 115 Vac plug to
operator
L 115 Vac
N Neutral
G Ground
Fig. 14.3.1 115 Vac terminal block
Fig. 14.3.2 Mains terminal torque and wire
label
Use Copper Conductors ONLY
1
2
3
6
L
N
G
Fig. 14.3.4 Power cord wiring kit 08121110
1 Power cord
2 Wire nut
3 Cord grip
4 Conduit box
5 120 Vac label
Fig. 14.3.3 Conduit box 08120730
4 Conduit box
4 11/16”
[119]
2 3/4”
[70]
4
1
2
3
4
5