Instructions for use Isolette 8000 plus SW 5.n 133
Reprocessing
1 Disconnect the condensation management hose (B) from the collection bottle
located underneath the left side of the incubator.
2 Remove the clamp (C) from the condensation management hose and discard.
3 Remove the condensation management hose:
A Turn the plug (D) at the bottom of the heater well 90 degrees
counterclockwise.
B Pull the hose/plug assembly out completely (E).
4 Discard the collection bottle and hose/plug assembly.
067071064
To Next Page
