Need help?Do you have a question about the Dräger PSS Merlin and is the answer not in the manual?
General| Brand | Dräger |
|---|---|
| Model | PSS Merlin |
| Category | Firefighting Equipment |
| Language | English |
Explains the meaning of warning icons used in the document.
Outlines essential safety guidelines for equipment use and maintenance.
Details critical safety measures for handling and charging batteries.
Covers proper disposal of electronic equipment and lists registered trademarks.
Introduces the Dräger PSS® Merlin® Telemetry System and its purpose.
Identifies and describes the components of the Entry Control Board front panel.
Details compatible electronic monitoring systems and their integration.
Explains the ECB's role, programming, and operation.
Describes how data is received and transmitted between the ECB and monitoring systems.
Instructions for using the remarks panel for manual data logging.
Information on the ECB's battery power source and operating time.
Step-by-step guide for charging ECB and individual batteries.
Explains sleep mode functionality and how to check battery charge status.
Procedures for preparing for entry and establishing initial communication.
Steps for manual logon and establishing communication.
How to view and cycle through various data points on the ECB.
Procedures for sending evacuation signals from ECB to monitoring units.
How wearers signal withdrawal or distress to the ECB.
Explains how to identify and manage loss of radio communication.
Steps for safely logging off wearers and shutting down the system.
Steps for forcing a log off when normal procedure fails.
Instructions for setting the time and date on the ECB.
How to perform a diagnostic test on ECB components.
Guide to programming new tallies with identification numbers.
Procedures for removing, fitting, and caring for battery packs.
Diagnosing and resolving common ECB faults and symptoms.
Troubleshooting issues related to Bodyguard® II and 7000 modem communication.
Resolving battery charging and system communication errors.
Identifying and addressing faults specific to the Connect ECU.
Specifies the temperature ranges for system operation and storage.
Details range, frequency, and power for telemetry transmission.
Introduces the Bodyguard® II unit and its main parts.
Covers power supply, battery charging, and initial procedures.
Details operational use, communication, and battery service for Bodyguard® II.
Introduces the modem unit and its associated tally.
Describes communication, signals, and faults for the Merlin® Modem.
Covers battery general use, care, fitting, removal, and charging.
Explains battery LED indicators, user interface, and charger functions.
Introduces the Connect ECU, its features, and tally usage.
Details communication, signals, and fault handling for the Connect ECU.
Explains using the ECB as a manual control board without telemetry.
Steps for manual tally insertion and initial activation.
Procedures for logging off wearers when using manual operation.
Discusses factors affecting radio signal transmission and antenna placement.
Details methods like repeaters and leaky feeders to improve signal coverage.
Guidance on conducting trials to assess system performance.
Explains the retreat alert, early retreat, and mission status displays.
Covers programming and using personal and serial number tallies.
Details tally write protection and linking channels for team operation.
How to log incident reports and use BS 8608 functionality.
To Next Page
