DRAGFLOW EL7.5 - General Safety Rules and Warnings

DRAGFLOW S.r.l. - Sede legale: Via Satiro, 11 – 37121 VERONA Italy
Sede amm.: Via Paesa – 46048 ROVERBELLA (MN) Italy ● Tel. +39 0376 1685400
Fax +39 0376 1685499 - Cod. Fisc e P. IVA : IT 02757460239 – R.E.A. Verona n. 280092
Registro Impr. Di Verona n. 189595/1997 Capitale Sociale € 10.400 interamente versato
EL7.5 - EL12.5 (S - SS) User manual - ENG 10/70
1.2.4 General safety rules and warnings
The manufacturer ensures the utmost commitment to make the equipment as safe
as possible, providing it with all the guards and safety devices deemed necessary.
Finally, the equipment has been accompanied with all the sufficient information to be
used safely and correctly.
Do not allow non-qualified operator to use the
machine.
Before beginning any operation on the
machine, the operator must be aware of the
location and meaning of all commands and
controls.
Before beginning any operation on the
machine, make sure that all the guards and
protections are correctly installed, in perfect
condition and completely efficient.
During the working operations, the operator
must be provided of the suitable personal
protective equipment.
It's responsability of the user to determine the working condition during the machine
use and consequently decide the required personal protective equipment.
Any suggestion given in this manual about a personal protective equipment use does
not replace the mentioned obligation on the part of the user.
Use the equipment within the limits indicated
in the technical specifications.