DRAGFLOW EL7.5 - Temperature Sensor; Spare Parts

DRAGFLOW S.r.l. - Sede legale: Via Satiro, 11 – 37121 VERONA Italy
Sede amm.: Via Paesa – 46048 ROVERBELLA (MN) Italy ● Tel. +39 0376 1685400
Fax +39 0376 1685499 - Cod. Fisc e P. IVA : IT 02757460239 – R.E.A. Verona n. 280092
Registro Impr. Di Verona n. 189595/1997 Capitale Sociale € 10.400 interamente versato
EL7.5 - EL12.5 (S - SS) User manual - ENG 66/70
7.3 Temperature sensor
The temperature sensor is a optional device required for the working temperature
control of the pump in order to stop it, if suitably wired, when the temperature exceed
a specified set-point value (default 150°c).
7.3.1 Spare parts
Fig. 43
POS.
Q.TY
PART NUMBER
DESCRIPTION
REPLACE POS./NR.
3A1
1
A3003394
SIGNAL CABLE GLAND
-
3A2
1
A3004088 (*)
SIGNAL CABLE (default 20 m)
-
3A3
1
160714 (^)
UPPER INSPECTION COVER
40 / F21202
(^) Any pump changeover to a temperature controlled type requires a different upper
inspection cover than the default one. See the SERVICE MANUAL for the cover replacing
instructions.