DRAGFLOW S.r.l. - Sede legale: Via Satiro, 11 – 37121 VERONA Italy
Sede amm.: Via Paesa – 46048 ROVERBELLA (MN) Italy ● Tel. +39 0376 1685400
Fax +39 0376 1685499 - Cod. Fisc e P. IVA : IT 02757460239 – R.E.A. Verona n. 280092
Registro Impr. Di Verona n. 189595/1997 Capitale Sociale € 10.400 interamente versato
EL7.5 - EL12.5 (S - SS) User manual - ENG 24/70
4.1.1 Before the first start
The following specific operation must be performed before the first start:
- check the presence of the lubricating oil in the oil chamber by unscrewing just
a little the “OIL” plug [A] to verify if some drop of oil comes out (see Fig. 5):
Fig. 5
- if oil is not found, fill completely the oil chamber (see Lubricating oil
changing/refilling in the Maintenance section);
Always use the suggested lubricating oil or
other type with equivalent properties (see
Lubricants specifications in the Maintenance
section).
To Next Page
Loading...