DRAGFLOW S.r.l. - Sede legale: Via Satiro, 11 – 37121 VERONA Italy
Sede amm.: Via Paesa – 46048 ROVERBELLA (MN) Italy ● Tel. +39 0376 1685400
Fax +39 0376 1685499 - Cod. Fisc e P. IVA : IT 02757460239 – R.E.A. Verona n. 280092
Registro Impr. Di Verona n. 189595/1997 Capitale Sociale € 10.400 interamente versato
EL7.5 - EL12.5 (S - SS) User manual - ENG 22/70
3.3 Dismantling
Before any dismantling operation, ensure to place the pump in a safe position and
disconnect the electrical supply and the delivery pipes.
The machine that is considered completely useless must be removed from the work site
and collected by the manufacturer or any other firm specialized in demolition.
Remember that dismantling the machine will produce different materials (metals,
plastics, oil, etc.) whose disposal will be done in compliance with the legislative
regulations in force in the state where the machine is found.
During dismantling, you could have some oil
leaks. Be sure to collect the leaked oil and to
maintain clean the environment.
To Next Page
Loading...