DRAGFLOW EL7.5 - Electrical Devices; Intended Use of the Machine; Safety of the Operators

DRAGFLOW S.r.l. - Sede legale: Via Satiro, 11 – 37121 VERONA Italy
Sede amm.: Via Paesa – 46048 ROVERBELLA (MN) Italy ● Tel. +39 0376 1685400
Fax +39 0376 1685499 - Cod. Fisc e P. IVA : IT 02757460239 – R.E.A. Verona n. 280092
Registro Impr. Di Verona n. 189595/1997 Capitale Sociale € 10.400 interamente versato
EL7.5 - EL12.5 (S - SS) User manual - ENG 17/70
2.1.4 Electrical devices
The pump cannot operate without previous connecting to a power source (such as
power generator) and a control panel.
Before using the pump, take care that all these electric devices are suitable to the
electric specification of the machine (see the machine plate and data-sheet) and meet
the related international standars, expecially about the safety of the operator and the
safeguard of the equipment.
The pump is not provided of an Emergency Stop button on board. Any electrical
system used for the power supply of the pump must be provided with the Emergency
Stop button.
The Emergency Stop button must stop instantly any electrical connection to the pump
after pushing and must keep the pump disconnected without resetting. After
resetting the Emergency Stop button, the pump cannot start automatically.
2.2 Intended use of the machine
The machine is designed produced and placed on the market for dredging operations,
that is pumping underwater a mixture of water and solid materials (sand, mud, rocks of
suitable dimensions) with density variable depending on the working condition.
2.3 Safety of the operators
The machine has been designed and produced with all the possible precautions to carry
out dredging operations under the utmost safety conditions, considering the current
state-of-the-art for this kind of equipment.
Before beginning any operation on the
machine, the operator must be aware of the
location and meaning of all commands and
controls.
Before beginning any operation on the
machine, make sure that all the guards and
protections are correctly installed, in perfect
condition and completely efficient.
During the working operations, the operator
must be provided of the suitable personal
protective equipment.
During dredging operations, the operator
must stay near the control panel and no one
must remains close to the dredging area.