DRAGFLOW S.r.l. - Sede legale: Via Satiro, 11 – 37121 VERONA Italy
Sede amm.: Via Paesa – 46048 ROVERBELLA (MN) Italy ● Tel. +39 0376 1685400
Fax +39 0376 1685499 - Cod. Fisc e P. IVA : IT 02757460239 – R.E.A. Verona n. 280092
Registro Impr. Di Verona n. 189595/1997 Capitale Sociale € 10.400 interamente versato
EL7.5 - EL12.5 (S - SS) User manual - ENG 7/70
1. Introduction
1.1. Identification data
Read in the following the name and address of the machine manufacturer:
DRAGFLOW S.r.l.
Via Paesa
46048 – Roverbella (MN) ITALY
www.dragflow.it
info@dragfow.it
Each machine is equipped with an identification plate that ensures it is produced
according to all the European directives in force and the necessary safety requirements.
This conformity is certified and is present on the respective identification plate bearing
the "EC" marking.
The model, serial number, year of construction are enclosed on the plate placed on the
main body of the machine. This data must be mentioned whenever a request for
information regarding the machinery is forwarded or for ordering replacement parts.
We recommend to provide, when possible, the following data:
- working hours of the equipment;
- purchase date;
- detailed information on any problems found.
Genuine parts should be used for the replacement of parts of the machine.
The manufacturer declines any responsibility regarding any worsening of performance
or damage to the machine or equipment, due to the use of non-genuine spare parts.
To Next Page
Loading...