DRAGFLOW EL7.5 - Transport, Installation and Dismantling; Transport

DRAGFLOW S.r.l. - Sede legale: Via Satiro, 11 – 37121 VERONA Italy
Sede amm.: Via Paesa – 46048 ROVERBELLA (MN) Italy ● Tel. +39 0376 1685400
Fax +39 0376 1685499 - Cod. Fisc e P. IVA : IT 02757460239 – R.E.A. Verona n. 280092
Registro Impr. Di Verona n. 189595/1997 Capitale Sociale € 10.400 interamente versato
EL7.5 - EL12.5 (S - SS) User manual - ENG 19/70
3 Transport, installation and dismantling
3.1 Transport
The pump is generally supplied encased inside a crate to avoid damage during transport.
The crate is arranged for moving with a fork-lift truck (Fig. 3), whose capacity must be
able to sustain the weight of the machine (see data sheet enclosed in the Attachment
chapter). The pump is provided with lifting point (A) as shown in Fig.3. Use this lifting
point to move and position the pump.
Fig. 3
After checking the weight of the machine, use
adequate lifting equipment to move and
position it.
Check the condition of the lifting point before
every lifting and moving operation.