Draytek Vigor167 User Manual

108
V-1 Checking the Hardware Status
Follow the steps below to verify the hardware status.
1. Check the power line and cable connections.
Refer to “I-2 Hardware Installation” for details.
2. Power on the modem. Make sure the POWER LED, ACT LED and LAN LED are bright.
3. If not, it means that there is something wrong with the hardware status. Simply back to “I-2
Hardware Installation” to execute the hardware installation again. And then, try again.

Draytek Vigor167 Specifications

General

VDSL	Yes
Interface	RJ-45, RJ-11
Modem speed	30000 Kbit/s
Antenna type	Internal
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	0 - 45 %
DC input voltage	12 V
Power consumption (typical)	4.4 W
Routing protocols	IP

Weight and Dimensions

Depth	181 mm
Width	40 mm
Height	125 mm
Weight	270 g