Draytek Vigor167 - II-2-7-2 IP Group

62
End IP Address Enter the ending IP address, if Address Type is IP.
IP Address Enter an IP address if Address Type is Subnet Mask.
Subnet Mask Enter subnet mask, if Address Type is Subnet Mask.
Invert If enabled, all addresses except the ones entered above will be used.
Cancel Discard current settings and return to the previous page.
Apply Save the current settings and exit the page.
After finishing this web page configuration, please click Apply to save the settings.
II-2-7-2 IP Group
Multiple IP Objects can be placed into an IP Group.
To add a new IP group profile, click the +Add link to get the following page.