Draytek Vigor167 User Manual

40
Cancel Discard current settings and return to previous page.
Apply Save the current settings and exit the page.
After finishing this web page configuration, please click Apply to save the settings.
II-2-2-3 Dynamic DNS
Most ISPs assigns dynamic WAN IP addresses to their customers. Dynamic IP addresses presents
challenges to users who would like to accept remote connections to their LANs from the Internet, as
service could be disrupted due to the IP address changing without notice. By setting up service with
a Dynamic DNS (DDNS) provider, and configuring Dynamic DNS updates on the Vigor router, you
can have reliable access to your network by means of an easy-to-remember domain address that
resolves to the most current WAN IP address.
The Vigor router supports a wide range of DDNS providers. Please contact the DDNS provider of
your choice to set up service before configuring DDNS on the router.
Item Description
Reset Click to clear all profiles to factory settings.
+Add Click to bring up the configuration page of the DDNS profile (max. 6).
Force Update Click to connect immediately to DDNS servers to update IP address
information.
To add a new DDNS profile, click the +Add link to get the following page.

Draytek Vigor167 Specifications

General

VDSL	Yes
Interface	RJ-45, RJ-11
Modem speed	30000 Kbit/s
Antenna type	Internal
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	0 - 45 %
DC input voltage	12 V
Power consumption (typical)	4.4 W
Routing protocols	IP

Weight and Dimensions

Depth	181 mm
Width	40 mm
Height	125 mm
Weight	270 g