Draytek Vigor167 User Manual

46
II-2-3-2 Bind IP to MAC
This function is used to bind the IP and MAC address in LAN to have a strengthening control in
network. With the Bind IP to MAC feature you can reserve LAN IP addresses for LAN clients. Each
reserved IP address is associated with a Media Access Control (MAC) address.
To add a new profile, click the +Add link to get the following page.
Available settings are explained as follows:
Item Description
Comment
Enter a brief comment to identify this IP Address–MAC Address pair.
MAC Address Enter the MAC address of the LAN client’s network interface.
IP Address Enter the IP address to be associated with a MAC address.
Cancel Discard current settings and return to the previous page.

Draytek Vigor167 Specifications

General

VDSL	Yes
Interface	RJ-45, RJ-11
Modem speed	30000 Kbit/s
Antenna type	Internal
Storage temperature (T-T)	-25 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	0 - 45 %
DC input voltage	12 V
Power consumption (typical)	4.4 W
Routing protocols	IP

Weight and Dimensions

Depth	181 mm
Width	40 mm
Height	125 mm
Weight	270 g